Parameters: pfield, value

The AddProcessor takes two parameters, one for pfield (positive integer > 0)and one for value (any number). When applied, it will add the user-defined value to the set pfield for all notes.

For example, you have a soundObject with notes for an instrument that uses p4 as it's amplitude. So if your notes had values for p4 within the range of 78 and 82, such as the following:

i1 0 2 78
i1 + . 80
i1 + . 81
i1 + . 82

If an addProcessor is used that was set to 4.4 for value 4 for pfield, your notes afterwards would be moved to the range of 82.4 to 86.4:

i1	0.0	0.5	82.4
i1	0.5	0.5	84.4
i1	1.0	0.5	85.4
i1	1.5	0.5	86.4

(The p2 and p3 times above are post-processing for a 2 second duration soundObject with time behavior or scale.)