vstparamset — Utilisé pour la communication de paramètres de et vers un greffon VST.
vstparamset et vstparamget sont utilisés pour la communication de paramètres de et vers un greffon VST.
instance - le numéro qui identifie le greffon, à passer aux autres greffons de vst4cs.
kparam - Le numéro du paramètre à fixer ou à lire.
kvalue - la valeur à fixer ou la valeur retournée par le greffon.
Les paramètres varient en fonction du greffon. Pour savoir quels sont les paramètres disponibles, utiliser l'option iverbose lorsque l'on charge le greffon avec vstinit. Noter que le protocole de VST spécifie que toutes les valeurs de paramètre doivent être comprises entre 0.0 et 1.0 inclus.
Voici un exemple de l'opcode vstparamset. Il utilise le fichier vst4cs.csd.
Exemple 1000. Exemple de l'opcode vstparamset.
Voir les sections Audio en Temps Réel et Options de la Ligne de Commande pour plus d'information sur l'utilisation des options de la ligne de commande.
<CsoundSynthesizer> <CsOptions> ; Credits: Adapted by Michael Gogins ; from code by David Horowitz and Lian Cheung. ; The "--displays" option is required in order for ; the Pianoteq GUI to dispatch events and display properly. -m3 --displays -odac </CsOptions> <CsInstruments> sr = 44100 ksmps = 20 nchnls = 2 ; Load the Pianoteq into memory. gipianoteq vstinit "C:\\Program Files\\Steinberg\\VstPlugins\\Pianoteq 3.0 Trial\\Pianoteq30 Trial.dll", 1 ; Print information about the Pianoteq, such as parameter names and numbers. vstinfo gipianoteq ; Open the Pianoteq's GUI. vstedit gipianoteq ; Send notes from the score to the Pianoteq. instr 1 ; MIDI channels are numbered starting at 0. ; p3 always contains the duration of the note. ; p4 contains the MIDI key number (pitch), ; p5 contains the MIDI velocity number (loudness), imidichannel init 0 vstnote gipianoteq, imidichannel, p4, p5, p3 endin ; Send parameter changes to the Pianoteq. instr 2 ; p4 is the parameter number. ; p5 is the parameter value. vstparamset gipianoteq, p4, p5 endin ; Send audio from the Pianoteq to the output. instr 3 ablankinput init 0 aleft, aright vstaudio gipianoteq, ablankinput, ablankinput outs aleft, aright endin </CsInstruments> <CsScore> ; Turn on the instrument that receives audio from the Pianoteq indefinitely. i 3 0 -1 ; Send parameter changes to Pianoteq before sending any notes. ; NOTE: All parameters must be between 0.0 and 1.0. ; Length of piano strings: i 2 0 1 33 0.5 ; Hammer noise: i 2 0 1 25 0.1 ; Send a C major 7th arpeggio to the Pianoteq. i 1 1 10 60 76 i 1 2 10 64 73 i 1 3 10 67 70 i 1 4 10 71 67 ; End the performance, leaving some time ; for the Pianoteq to finish sending out its audio, ; or for the user to play with the Pianoteq virtual keyboard. e 20 </CsScore> </CsoundSynthesizer>